Get the ultimate oil separator for your 14-18 GM GMC Chevrolet Silverado Truck 5.3L with UPR Dual Valve Plug N Play ™ Catch Can.
The Dual valve catch can will not only circulate through during low speed driving and idle ( when there is higher manifold vacuum ) , it will allow circulation and crank case evacuation when under Wide Open Throttle ( where there is less manifold vacuum) since UPR adds a Wide Open Throttle hose. When towing uphill or hauling heavy loads, the WOT hose will allow air being drawn through the air intake tube to continue to pull air through the catch can system.
You can be sure that no other manufacturer can give you the level of quality or performance of a UPR Pro-Series Catch Can. Offering the largest capacity in a compact design to be sure that it can eliminate oil vapors on vehicles that are normally aspirated or power added equipped. Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like. UPR is the largest aftermarket catch can manufacturer in the country. Continually improving our designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts.
**Now available with longer hose lengths for those with aftermarket Cold Air intakes- Select a kit for Cold Air in the drop down menu**
This kit does NOT include a Clean Side Separator (CSS). See part number 5030-168-CSS
THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED
This UPR Pro Series catch can kit is shipped ready to install even if no upgrades are selected. Upgrades are available to allow you to tailor the kit to fit your needs. See the description below and select any upgrades from the drop down menus.
The Billet Pro Series check valve is a larger, higher flowing check valve than our standard check valve. It generally will increase the vacuum through the catch can and equate to better PCV evacuation. Better evacuation can translate to better MPG and low speed drivability. If you plan on adding a Supercharger or Turbo kit, this is recommended.
The One way crankcase breather is a breather with a one way valve in it. It allows excess crankcase pressure to exit through the breather filter when needed, and will close when crankcase pressure is normal, which keeps un metered air from entering. Installation can't be easier! Just remove your oil fill cap and install the UPR Billet One Way Breather. Highly recommended on Boosted engines.
The Stainless Steel magnetic drain plug would replace the drain plug on the bottom of the catch can with an Allen head plug that has a magnet embedded into it. It will attract any ferrous metal material to it so the user can inspect it.
The drain line kit is our most popular drain option. It includes a drain valve, hose and fittings needed to install the drain valve. It allows the user to relocate the drain somewhere easier to access like the wheel well opening or bumper area. (You would choose either the Magnetic Drain Plug, or the Drain line kit - not both. If no drain option is selected, a standard plug will be installed)
The UPR catch cans have an O ring seal on the containment cup. Replacement O rings are available if you lose, drop, or tear an O ring when servicing the catch can. It's not a bad idea to have a spare set in the glove box.
» 12oz Capacity
» Show Quality Finish
» Can measures 6" x 3"
» Nickel T fittings & Drain Cock
» Prevents Oil from Entering Intake
» Exclusive 4 Chamber Design Traps Oil
» High Quality CNC Machined Billet Aluminum
» Plug N Play
™ fittings at Can connections
» Improves Fuel Economy, Throttle Response & Performance
» 5/8" Oil Resistant Goodyear Braided Hose included
» Available in Satin or Black - Select Finish Above
» Available for Stock Air Intake or Aftermarket Cold Air - Select Above
Installs in 30-45 minutes.
» Nickel Drain Cock
» Adjustable Mounting Bracket
» 5/8" Continental Braided Hoses
» Billet Hose Ends with Clamps
» Hi-Flo Billet Check Valves (2 PCS)
» Plug N Play ™ quick release connectors & billet fittings
» Dual Valve Billet Catch Can (Exclusive 4 Chamber Design)
2014 2015 2016 2017 2018 GM GMC Chevrolet Silverado 5.3L LS Trucks
No one else can stack up to the bold clean styling of our aftermarket Billet dress ups, Street Strip & Racing Suspension & Performance Parts for your late model American Muscle Car!